top of page
  • Adrien Book

The "Next Big Thing": 8 New Technologies That Will Change The World

In 2020, I wrote an article titled “The Next Big Thing” in Technology: 20 inventions that will change the world”. It has since been read over 100,000 times and shared more than 5,000 times on social media. But anyone reading it today will notice that what was written then is now obsolete. An update is necessary, highlighting the key technologies emerging today that will be all the rage by 2030 (or 2028… or 2032…).

These time-frames should be taken with a grain of salt: predictions are wrong more often than not, especially when it comes to technology (check my 2023 tech predictions if you don’t believe me). That’s because we tend to use history, which is at its heart the study of surprises, as a guide to the future. This should however not stop us from aiming to better understand the future. Firstly, because the knowledge gained through planning is crucial to the selection of appropriate actions as future events unfold. Secondly… if you don’t make predictions, you’ll never know what to be surprised by! With this in mind, here are 8 inventions that will change the world in the next few years.

1. High-temperature superconductivity

No, not room-temperature. High-temperature.

High-temperature superconductivity (HTS) is the ability of certain ceramics to have zero or low electrical resistance at temperatures higher than −196°C / −321°F (regular superconductors territory). This means HT superconductors can be cooled with simple liquid nitrogen rather than require expensive and hard-to-handle coolants like liquid helium. They can also withstand much higher magnetic fields than Low-Temperature superconductors.

There are a lot of applications for superconductive materials, but only one is truly transformative (while remaining utterly boring): HTS will improve the electric power sector and reduce its environmental impact by reducing technical losses and increasing energy efficiency. Down the line, there are discussions around its use within fusion reactors, but those conversations are too early to be definite.

In any case, HTS is still a relatively immature technology. Ceramic superconductors are becoming suitable for some practical use but are today more complex and costly than comparative conventional technology. As with everything else on this list… more research is needed!

  • Read more about HTS on IBM’s website.

2. Commercial nuclear fusion power

Nuclear fusion is, in its most common form, the process of energy being released when bits (“atomic nuclei”, if you’re nasty) of hydrogen are exposed to extreme heat and combined. This process releases large amounts of energy, which humanity is increasingly hungry for. That’s how the sun works too, by the way.

The importance of nuclear fusion lies in earth’s near-unlimited hydrogen supply, which can be extracted from water, and the fact that its only by-product is harmless helium. Fusion reactors are also safer than fission reactors, as they do not create any long-lived radioactive nuclear waste. If implemented, commercial nuclear fusion power would provide cheap utility-scale energy with very little environmental impact and improve energy availability and security.

Several countries have heavily invested in fusion research, and private companies are also conducting their own trials. The ITER reactor, which is under construction in France and due to begin operation in 2026, is the first reactor that should produce energy-positive fusion; but dozens of others are being built.

However, fusion research is slow and capital-intensive. The technology’s biggest issue is that rectors currently need to create temperatures hotter than those found on the sun to start the fusion reaction. Doing so requires more energy than what the reaction produces. Despite recent advances, commercial operation of fusion power is still uncertain and likely more than a decade away.

3. Robot knowledge sharing

Whether they are in factories, in warehouses, at home, or on the street, robots are impressive… yet profoundly stupid. They work well in highly controlled environments, but every new situation stumps and/or breaks them, which tends to be very expensive. “Robot knowledge sharing” protocols would change that creating a standardised way for robots to share information with each other. 

That information would be gathered through trial and error (aka reinforcement learning), which we know to be an efficient way for AIs to learn. It could take many forms, from the simple knowledge that an obstacle has appeared on a road, to the ability to grab a complex shape. Efficiency will go up exponentially, and robotics costs will decrease at breakneck speed.

Robot Knowledge sharing

Once the genie is out of the bottle, we will not be able to put it back. But let’s hold the Terminator talks for 2040: hardware, sensors, machine learning processes, data configuration… much needs to be standardised before the concept works. All the big players will want their way to be the right way, and nothing may get done. At the end of the day, it may be humanity’s inability to agree on anything that saves it.

4. Digital Twin of a customer

Have you ever wanted, like, the most boring crystal ball ever? Want no more: companies are building just that by using AI to create digital twins of customers. They will be able to predict the future… but only the part where you decide which brand of toilet paper you’ll buy. If that feels like a Balzac premise, trust your instincts.

Digital Twin of a Customer

With enough data (purchase history, browsing history, social media profiles, geo-localisation, social connections…) and dynamic algorithms, it is now easy to create capitalistic digital replicas of specific persons or personas. 

These replicas would not only be able to help companies understand and predict behaviors, but also cheaply test how changes in purchasing environments would affect customer decisions. 

As markets become tighter and the cost of borrowing more expensive, companies have little margin of error when it comes to products, services, promotions, marketing campaigns… Being able to play with categories of customers as we once played The Sims will no doubt reduce the cost of failures and maximise stockholder profits. That’s the whole point, right?

Digital Twins are already being tested and will no doubt be accurate at the personas / customer category level. Things are however likely to be different for individuals : we may finally be wary enough of having our data harvested for manipulative purposes that granular tracking is becoming harder. Companies looking to create Digital Twins will need to establish trust in their process and use of the technology. And even then… how could they predict the unpredictable (2020, anyone)?

5. 6G

Just 3 years ago, I was writing about 5G and the numerous industries it would transform: IoT, self-driving, entertainment… and we’re far from being done experimenting with it. And yet, it’s already time to look to the future of internet service: 6G. The good news for me is that 6G’s features are not yet fully agreed on. I can describe what I hope it will be able to do and complain later when I’m inevitably disappointed. In this case, “later” may be a while away: though design and research has already begun, 6G commercialisation won’t be before 2030. This follows the telecom industry’s familiar pattern of adding a new generation every 10 years.

In the meantime, here’s what we do know: the technology will go above and beyond 5G with regards to providing higher peak data rate, lower latency, much more connection density, and energy efficiency. Whether the jump will be as significant as 4G to 5G was is still to be seen, though. Most experts agree that AI will be a key component of the technology, as will secrecy, security, and privacy.

What will be fully different from 5G is the government’s implication in its design: the Korean, Japanese, and American governments already intend to have a say in the future infrastructure of their country. Whether that’s a net positive for privacy is yet to be seen…

  • Read more about 6G on Wikipedia (can’t beat the OG)

6. 4D printing

The name 4D printing can lead to confusion: I am not implying that humanity will be able to create and access another dimension. Put simply, a 4D-printed product is a 3D-printed object which can change properties when a specific stimulus is applied (submerged underwater, heated, shaken, not stirred…). The 4th Dimension is therefore Smart Materials.

The key challenge of this technology is obviously finding the relevant “smart material” for all types of uses (namely a hydrogel or a shape memory polymer for the time being). Some work is being done in this space, but we’re not close to being customer-ready, having yet to master reversible changes of certain materials.

The applications are still being discussed, but some very promising industries include healthcare (pills that activate only if the body reaches a certain temperature), fashion (clothes that become tighter in cold temperatures or shoes that improve grip under wet conditions), and homemaking (furniture that becomes rigid under a certain stimulus). Another cool use case is computational folding, wherein objects larger than printers can be printed as only one part.

7. Smart Street Poles

As cities around the world look to embrace new technologies and become more efficient, sustainable, and livable, street poles will emerge as a crucial infrastructure element. By imbedding a wide range of IoT devices (cameras, sensors, monitors, displays..) into the existing light poles we know and love, we will soon be able to centrally monitor and control them, making them the hub for various smart city services. 

These decades-old staples of city living will soon be used for electric vehicle charging, interactive lighting, parking management and crowd control. Moreover, they will form the foundation for citywide Wi-Fi or 5G networks, facilitating advanced computing and communication for intelligent urban services (like autonomous vehicles). They’re here, they’re useful… and tomorrow they will be even more so, while remaining cost-efficient (you can even find them on Alibaba).

There’s however still a long way to go before Smart Street Poles become a widespread reality. Ownership complexities, evolving ROI expectations, asset management, data orchestration, cybersecurity, and privacy concerns are some of the challenges that need to be overcome to ensure scalability and widespread adoption. I however remain confident : the Public/private debate has raged for centuries, and the poles are still standing.

8. Ion-Propelled UAVs

Smart Poles aren’t the only upgrades the City of the Future will offer. SciFi has long made us dream of having flying cars, but what few had really thought about is just how loud propellers or turbine blades can be, making them unusable in urban areas. So we had to come up with a solution which has no moving part : Ion-Propelled UAVs (unmanned aerial vehicle).

Ion propulsion is easy. Instead of regular fuel, a Special Gas (xenon) is used. Electricity is used in the engine to give Tiny Kicks to the xenon atoms. They lose an electron and become Positively Charged, becoming “ions.” These ions are then Pushed out of the back vehicle at very high speeds, thanks to an electric field. This works particularly great in space, where a lack of resistance ensures an object can go far with very little xenon on-board.

Things become a lot harder on earth (due to air resistance and gravity). Such a vehicle would need to be lightweight to work. As such, it would not be able to go very high, and may not be safe at first. However, as shown below, there is a world in which ion-propelled UAVs become a reality. A silent, carbon-conscious reality. Wouldn’t that be nice.

 

Technology tends to hold a dark mirror to society, reflecting both what’s great and evil about its makers. Today, more than ever, it’s important to remember that technology is often value-neutral; it’s often what we decide to do with it day in and day out that defines if a technology is the “Next Big Thing” or the “Next Big Flop”.

Let’s make sure everything described above is used to advance society in a fairer and more human direction.

Good luck out there.

Comments


You may also like :

Thanks for subscribing!

Get the Insights that matter

Subscribe to get the latest on AI, innovative business models, corporate strategy, retail trends, and more. 

No spam. Ever.

Let's get to know each other better

  • LinkedIn
  • Twitter
  • Instagram
  • Buy Me A Coffee
bottom of page